New Products

DIN rail power supply AC220V/ DC12V 5A comply with EN55022, CLASSA

DIN rail power supply AC220V/ DC12V 5A comply with EN55022, CLASSA

Price excl. tax: 30.00лв.
Price inc. tax: 36.00лв.
MaticBox 4 innovative case for Raspberry Pi

MaticBox 4 innovative case for Raspberry Pi

-9%
Price excl. tax: 16.23лв.
Price inc. tax: 19.48лв.
List Price: 21.42лв.
discounts info
Discounts info
Price excl. tax: 16.23лв.
Price inc. tax: 19.48лв.
Amounts excluding tax:
Price: 16.23лв.
List Price: 17.85лв.
Discount: 1.62лв. (9.08%)
Module to protect battery from deep discharge

Module to protect battery from deep discharge

Price excl. tax: 11.50лв.
Price inc. tax: 13.80лв.

Mobile communicator with a built-in battery - Valcor GSM56

Code: GSM56
Description

GSM communicator with built-in modem for announcement and independent guarding of homes, offices, cars. Possibility of remote control of electric consumers - fireplaces, boilers, air conditioners or others. Dual power supply - mains and battery. The communicator has 5 input zones, one open collector output, two modes of operation, output control via command SMS or ring-free, remote programming of the SMS communicator. Announces by ringing and sending information SMS, monitors the quality of the GSM signal (range), which allows the installation to find the most suitable place.
It can also notify by ringing. There is no need to pay any additional monthly fees for the use of the GSM communicator, except for the actual communication fee (calls or SMS) from the communicator to the notified phones, according to the tariff of the respective mobile operator where you have taken a SIM card .

You can download the free Android app "Valcor GSM" from Google Play, making it easy, convenient and easy for anyone to program, control and get information about your communicator. Communication between the application and the GSM communicator is done by ringing and / or SMS.

The GSM communicator has the ability to provide information about the cell number in which it is located. This information can locate its location, and when there is movement - moving from cell to cell, it alerts itself, triggering. Can be used to detect or position objects. This is a highly effective free localization method. It is displayed on Internet cards by entering cell numbers / parameters on Internet sites. Position the location of the corresponding cel


 

  • Manufacturer: Valcor
  • Weight: 0.200 Kgs
Price excl. tax: 87.20лв.
Price inc. tax: 104.64лв.

We have 5 in stock

 

Quantity:
Send to friend Rate this product Add to wishlist

The set includes:
Module in plastic box - - 57 mm, length - 76 mm, height - 30 mm.
Antenna 3dB,
Input connection cable,
Power plug,
Li-Ion battery 3.7V
Detailed operation description and installation drawings!

Technical parameters:
1. Supply voltage - DC12V (min. 10V - max. 16V)
2. Consumed resting current - max.50mA.
3. Maximum current consumption with peripheral included - 1A;
4. Operating temperature - 5 ° C ~ + 40 ° C;
5. Operating humidity - 0 ~ 75% (no condensation);
6. Class of protection - IP21;

 

VALCOR GSM56 FEATURES:
Possibility to work and setup with the SIM cards of all GSM operators, including the features of their prepaid services - with time and functional parameters, as well as with international operators.
Four telephones for notification, control and communication,
Remote programming via SMS or via free Android application "Valcor GSM",
Five input zones, which can be selected by NO or CN to the table.
One programmable user output - open collector,
All SMS sent by the communicator is instantly composed and reflects the current state of the communicator, inputs, outputs, and the quality of the GSM signal.
Ability to work as a stand-alone alarm system,
Possibility of simultaneous use as a security system, remote control of appliances and telemetry.,
A function for locating the communicator's location through the GSM cell to which it is connected,
Dual power supply - mains and battery. Monitor mains power.

WORKING MODE:
Mode 0:

Telemetry, Control and Control. When an active level is in any of the zones, the communicator rings all the programmed telephone numbers and / or sends SMS to the current status. Output - built-in relay that can be commanded by SMS or with a ring-free call! Possibility to autonomously charge the battery and measure its voltage. Monitoring the status and measurement of the mains supply.
Connection to home / car alarm system. Zone 1 monitors alert alarm when alarm level is triggered (NO or NC table). When the zone is triggered, the communicator rings all the programmed phones and / or sends SMS to the current status. Zones 2, 3, 4, 5 monitor the current state of the sensors, but no activation will follow when triggered. Their alert level can choose - when table or table drops. Zone 5 can be configured to monitor the alarm's main power or status, while changing the status of the zone is sent SMS to the current state of the communicator to all programmed handsets without ringing. Possibility to autonomously charge the battery and measure its voltage. Monitoring the status and measurement of the mains supply.

Control of fireplaces, air conditioners or other electrical appliances, telemetry and control. The open collector output is used for remote control, via external relay, on a device via SMS or a call without charging! The relay can be controlled by pressing a key or key connected to Zone 1. An LED can be connected to zone 5 that flashes when the relay is on. This way you can operate your device locally and remotely by having a visual indication of the status. Zone 4 can be used to monitor power or status, and when the status of the zone is changed, SMS will be sent to all phones without a ring. Areas that do not have specific features can be used to monitor and control processes and conditions by alerting via SMS and ringing. You can select the active levels of the zones. (the active level is chosen between dropping or dropping). Possibility to autonomously charge the battery and measure its voltage. Monitoring the status and measurement of the mains supply.

Mode 1 - The communicator works as a stand-alone security system. Zone 1 is used to turn on and off the security (with key or key). Turning the security on and off can also be done remotely via SMS or via a non-charged ring. In security, when any of the other zones are triggered, the communicator will ring the authorized phones and / or send the SMS with the current status. You can select the active level of zones 2, 3, 4, 5 to be NO or NC to the table. In this mode, there is an input delay of 8 sec. When zones are triggered. You can use zone 5 as output status and include an LED that will flash when the security is on. After you turn on, you have 10 seconds. output delay before the zones are taken under guard. The Open Collector Output is used via an external relay to turn on chevrons or to independently control any instrument. C Standalone battery power supply and voltage measurement. Status monitoring and network power measurement.

Quantity Price excl. tax Price inc. tax
1 87.20лв. 104.64лв.
10 82.84лв. 99.41лв.

XHTML Box

Mini Cart

Cart is empty.

Currency

Custom Products

Electronic door lock BULKEY BK VCB3

Electronic door lock BULKEY BK VCB3

Price excl. tax: 112.25лв.
Price inc. tax: 134.70лв.
Mobile communicator with a built-in GSM - Valcor GSM50

Mobile communicator with a built-in GSM - Valcor GSM50

Price excl. tax: 76.00лв.
Price inc. tax: 91.20лв.