New Products

digital temperature sensor

digital temperature sensor

Price excl. tax: 7.30лв.
Price inc. tax: 8.76лв.
Fail safe electronic Drop Bolt Lock

Fail safe electronic Drop Bolt Lock

Price excl. tax: 65.50лв.
Price inc. tax: 78.60лв.

HATL02FP Auto-Fan Control & I2C, 5V, TXD, RXD pins

Code: HATL02FP
Description

Do you want to extend the life of your fan, reduce its noise and control it automatically?
With this MaticControl fan module you can! As a bonus, the second connector provides access to the I2C, 3.3V and 5V pins.
I2C pins along with a 3.3V pin are often used to connect displays or other modules that use an I2C pins
Place it on pins 1-10. (As shown in the photos) And this is all you have to do on the hardware.

Then from Raspberry icon > Prefernces> Raspberry Pi Configuration > Performance tab >set fan enable; Fan GPIO  4; and the temperature at which you want the fan to turn on. Save with OK
Thus, when the processor reaches the temperature you set, the fan will turn on. It will turn on off only when the processor temperature drops 10 degrees below the set on temperature. (For example, if you set the On temperature to 75 degrees, the fan will turn off when the processor reaches 65 degrees).
With these few easy steps, you now have automatic fan control.

If you want to activate this feature through the console or read the full documentation – read the article or download the PDF from HERE

Note: This MaticControl module provide access to I2C, 5V, 3.3V. GPIO14(RXD), GPIO15(TXD) pins via separate connector on the top of the board.

Compatible with MaticBox Automation cover

  • Weight: 0.050 Kgs
Price excl. tax: 7.00лв.
Price inc. tax: 8.40лв.

We have 100 in stock

 

Quantity:
Send to friend Rate this product Add to wishlist

XHTML Box

Mini Cart

Cart is empty.

Currency

Custom Products

Electronic door lock BULKEY BK VCB3

Electronic door lock BULKEY BK VCB3

Price excl. tax: 112.25лв.
Price inc. tax: 134.70лв.